What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Jasco TSP Substitute-04/21/2015-Old Product
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaJasco TSP Substitute is recommended to bond old enamel, oil-based or latex paint, varnish, or lacquer finishes to new coatings, or before wallpapering. It removes grease, grime, mildew stains, food stains, crayon, dirt, smoke, old wallpaper paste and wax from painted or unpainted wood, metal, or vinyl wallpaper.
Purpose of product.
Usage: Paint prepStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 20242105 Channel Avenue
Memphis TN 38113
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
Primary Chemical Name is the standard name assigned to a chemical substance.
ChemicalChemical Abstracts Service Registry Number is a unique identifier for a chemical and its synonyms. CAS numbers identify the chemical, but not its concentration or specific mixture. CAS Registry Numbers are assigned by the Chemical Abstracts Service, a division of the American Chemical Society. For more information: www.cas.org
CAS No./ID
We have assigned "ID numbers" (with 6 leading zeros or nines, e.g., 000000-xx-x , 888888-xx-x) or 999999-xx-x) for blends and chemicals that do not have CAS numbers.Percent of chemical in preparation.
% Conc.Chemical of Concern (CoC)
Chemical of Concern(CoC)C9-11 Pareth-3 068439-46-3 <5 No Diethylene glycol monobutyl ether 000112-34-5 <10 Yes 
CoC List
Sodium metasilicate 006834-92-0 <5 No Sodium xylenesulfonate 001300-72-7 <5 No -
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Safety Data Sheet (SDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Safety Data Sheet(SDS) Date that the Safety Data Sheet (SDS) was issued by manufacturer of a specific product.
SDS DATE :April 21, 2015 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2 0 0 -
V.O.C Information
Volatile Organic Compounds %/Wt. With Solvent : 0
Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels12.7-13.4 -
Warnings
Hazard Statements
Danger. Causes severe skin burns and eye damage. Causes serious eye damage. May cause respiratory irritation.
Precautionary Statements
Do not breathe gas/mist/vapors/spray. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. Wear {protective gloves/protective clothing/eye protection/face protection}.
Response
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
IF ON SKIN (or hair): Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. Wash contaminated clothing before reuse.
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor/physician.
Storage
Store container tightly closed in well-ventilated place. Store locked up.
Disposal
Dispose of contents/container according to local, state and federal regulations.
DANGER: MAY CAUSE BURNS TO EYES. SKIN IRRITANT. HARMFUL IF SWALLOWED. Contains Sodium Metasilicate and 2-Butoxyethanol. Avoid contact with eyes and skin. Do not ingest. -
Acute health effects
From SDS:
Hazards Identification
Danger. Causes severe skin burns and eye damage. Causes serious eye damage. May cause respiratory irritation.
Potential Health Effects
Eye Contact: This material is an eye irritant. May cause irritation; redness and swelling of the conjunctiva; excess blinking and tear production; possible burns, eye damage, blindness.
Skin Contact: May cause irritation, itching, redness; swelling; inflammation; discomfort or pain; possible burns. May cause more severe effects on covered skin.
Inhalation: May cause dizziness; headache; irritation of the respiratory system; nausea and vomiting.
Ingestion: Moderately toxic if ingested. Small amounts swallowed incidentally are not likely to cause injury, however, larger amounts may cause injury. -
Chronic health effects
From SDS:
Effects on animals have been reported to include the blood (hemolysis) and secondary effects on the kidney and liver. May cause skin and eye damage. -
Carcinogenicity
Not Listed.
-
Handling information
Read carefully all cautions and directions on product label before use. Since empty container retains residue, follow all label warnings even after container is empty. Dispose of empty container according to all regulations. Do not reuse this container. Keep container tightly closed when not in use. Store in a cool, dry place. Do not store near flames or at elevated temperatures.
-
Disposal information
Dispose in accordance with applicable local, state, and federal regulations.
-
First Aid
Eye Contact: Immediately begin to flush eyes with water, remove any contact lens. Continue to flush the eyes for at least 15 minutes. Seek medical attention.
Skin Contact: Remove contaminated clothing. Immediately wash skin thoroughly with large amounts of water and mild soap, if available. Seek medical attention if irritation develops or persists.
Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get immediate medical attention.
Ingestion: If swallowed, do NOT induce vomiting. Seek immediate medical attention. Call a physician or poison control center immediately. Never give anything by mouth to an unconscious person.
-
UN Global Harmonization Classification
