What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Henry 224 Window and Door Sealant-06/24/2014
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaHenry 224 Window and Door Sealant, a 100 percent acrylic elastomeric adhesive sealant with silicone, is a mildew resistant, rust inhibited, paintable sealant. Specifically formulated for high joint movement, this product features the strength and flexibility of a silicone sealant with the added benefit of water clean up. Its smooth, creamy consistency makes it easy to tool and cure to a tough flexible seal. It can be used for both interior and exterior applications such as crown molding, chair rails, baseboards and all exterior trim.
Purpose of product.
Usage: Trim adhesiveStructure such as solid, liquid, aerosol etc.
Form: liquidDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 2024999 North Pacific Coast Highway, Suite 800
El Segundo CA 90245
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :June 24, 2014 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING1 1 0 -
V.O.C Information
Volatile Organic Compounds %/Wt. With Solvent : 8.9
Measure of Alkalinity/Acidity of substance or preparation where a level of 7 is considered as neutral.
pH Levels7.8-8.2 -
Warnings
Caution! Keep away from heat and flame. Use with adequate ventilation. Avoid contact with eyes and skin. May cause eye and skin irritation. May cause allergic skin and/ or respiratory reaction in persons previously sensitized to isocyanates. Avoid prolonged breathing of vapor. Do not take internally. Keep container closed when not in use. Store product in a cool place. Keep out of reach of children! For exterior use only!
Warning: this product contains detectable amounts of chemicals known to the State of California to cause cancer, or birth defects, or other reproductive harm. -
Acute health effects
From MSDS:
Hazards Identification
Emergency Overview: CAUTION! Direct skin and eye contact may cause irritation.
Potential Health Effects
Primary Routes of Entry: Inhalation.
Eye Contact: May cause eye irritation.
Skin Contact: May cause skin irritation.
Inhalation: Breathing airborne particles or dust from misting, spraying, sanding, grinding, etc. may cause irritation to respiratory tract.
Ingestion: May be harmful if swallowed. May cause gastric distress. -
Chronic health effects
From MSDS:
Chronic exposure can lead to permanent brain and central nervous sytem damage. -
Carcinogenicity
IARC has concluded that the following chemicals in this product are possibly carcinogenic to humans (Group 2B): titanium dioxide
-
Handling information
Freezing will damage the emulsion.
-
Disposal information
Dispose in accordance with applicable federal, state and local government regulations.
-
First Aid
Eye Contact: In case of contact, hold eyelids apart and immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention immediately if irritation develops and persists.
Skin Contact: Remove contaminated clothing and shoes. Wash affected areas with soap and water.
Inhalation: Remove the person from the contaminated area to fresh air. Contact a physician if symptoms develop.
Ingestion: Never give anything by mouth to an unconscious victim. Call a physician or poison control center immediately.
-
CoC List
UN Global Harmonization Classification
