What's in it?
Search Entire CPID Database
Enter Products, Manufacturers, Chemicals, Product Categories and Product Types
 |
Loctite PL Polyurethane Roof and Flashing Sealant-Old Product
Products in this Consumer Product Information Database (CPID) are classified based on their composition:
Substances: single chemicals
Preparations: products which contain chemicals that can be easily separated during normal use
Articles: products or product assemblies that do not contain chemicals that can be separated out from the product or assembly under normal or advertised use.
Classification: Preparation
Indicates country where product is sold.
Market: US/CanadaLoctite PL Polyurethane Roof and Flashing Sealant is a premium quality, commercial grade sealant developed especially for forming permanent, water and weatherproof seals in all exterior gaps and joints. This sealant is elastic and remains flexible to expand and contract with construction material movement to protect and retain the original seal. It provides properties of non-sag, permanent flexibility and corrosion resistance. It exhibits outstanding durability and tear resistance. It usually requires no primer and resists deterioration from weather, stress or movement. It is UV and ozone resistant and does not soften in the sun.
Purpose of product.
Usage: Roof and Flashing CementStructure such as solid, liquid, aerosol etc.
Form: pasteDate when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
Date verified: February 15, 2024200 Elm Street
Stamford, CT CT 06902
-
Chemical Composition/Ingredients
The GHS is an acronym for The Globally Harmonized System of Classification and Labelling of Chemicals. The GHS is a system for standardizing and harmonizing the classification and labelling of chemicals. Chemicals are associated with codes that define their health, physical and environmental hazards.This universal hazard communication system was developed to ensure that employers, employees and consumers are provided with adequate, practical, reliable and comprehensible information on the hazards of chemicals, so that they can take effective preventive and protective measure for their own health and safety.
Advanced
The GHS classifications for chemicals associated with products in this database may be viewed by selecting the "Advanced" button on the Chemical Ingredients tables. Since this is a work in progress, GHS classifications may not be shown for all chemical ingredients.-
-
Health Effects Information
Ingredients and Health Effects Information are taken from the manufacturer's product label and/or the Material Safety Data Sheet (MSDS). Products are not tested and manufacturer's information presented here is not evaluated by DeLima Associates.
View Material Safety Data Sheet(MSDS) Date that Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was issued by manufacturer of product.
MSDS DATE :August 27, 2010 Date when validity of Material Safety Data Sheet (MSDS) or Safety Data Sheet (SDS) was last verified.
MSDS Verified :March 10, 2011 Health Flammability Reactivity HMIS is the Hazardous Materials Identification System developed by the American Coatings Association and indicates the levels (“1” to “4”) of Health Hazard, Flammability Hazard and Physical Hazard associated with a specific product.
HMIS RATING2* 1 1 -
V.O.C Information
Volatile Organic Compounds g/L With Solvent : < 44
-
Warnings
Avoid contact with eyes, skin and clothing. Avoid extreme temperatures. Wash thoroughly after handling. Protect from moisture. Use only with adequate ventilation.
For safe storage, store between 18.3 degrees C (64.9 degrees F) and 40 degreesC (104 degrees F) Avoid moisture. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. -
Acute health effects
From MSDS:
Hazards Identification
Emergency Overview: Combustible! Harmful if inhaled. Causes eye, skin and respiratory tract irritation. May cause allergic skin and respiratory reaction.
Relevant routes of exposure: Inhalation, Skin contact, Eyes, Ingestion.
Potential Health Effects
Inhalation: This product may cause sensitization by inhalation and skin contact. May cause respiratory tract irritation. As a result of previous repeated overexposures or a single large dose, certain individuals will develop isocyanate sensitization (chemical asthma) which will cause them to react to a later exposure to isocyanate at levels well below the TLV. Chronic overexposure to isocyanates has been reported to cause lung damage. Dryness of nasal passages, sore throat, cough, tightness of chest, shortness of breath. Persons suffering from allergic reactions to isocyanates should avoid contact with the product.
Skin contact: Contact with skin can cause irritation and allergic reaction (sensitization) in some individuals. This product may discolor the skin.
Eye contact: Contact with eyes will cause irritation.
Ingestion: Ingestion of this product may cause nausea, vomiting and diarrhea.
Existing conditions aggravated by exposure: Development of preexisting skin or lung allergy symptoms may increase. Asthma. -
Chronic health effects
From MSDS:
No information provided. -
Carcinogenicity
Components of this product are listed as carcinogens by IARC and NTP.
-
Handling information
Avoid contact with eyes, skin and clothing. Avoid extreme temperatures. Wash thoroughly after handling. Protect from moisture. Use only with adequate ventilation.
For safe storage, store between 18.3 degrees C (64.9 degrees F) and 40 degreesC (104 degrees F) Avoid moisture. Keep in a cool, well ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use. -
Disposal information
Dispose of according to Federal, State and local governmental regulations.
-
California Prop. 65 Warning
This product contains a chemical known in the State of California to cause cancer. This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
-
First Aid
Inhalation: If inhaled, immediately remove the affected person to fresh air. Immediate medical treatment necessary.
Skin contact: Wash affected area immediately with soap and water. If symptoms develop and persist, get medical attention. Remove contaminated clothes.
Eye contact: In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention.
Ingestion: Do not induce vomiting, seek medical advice immediately.
Notes to physician: An individual having a dermal or pulmonary sensitization reaction to this material should be removed from further exposure to any diisocyanate.The physicians judgment should be used to control symptoms and clinical condition based on the individual reactions of the patient.
.
-
CoC List
UN Global Harmonization Classification
